Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > ATC
Merken:
Boekenplak Speakers - ATC
ATC SCM100A SL Classic
The SCM100 ASL active is designed to perform at their best with the finest quality hi-fi equipment.
 
Like their smaller brother, the SCM50A SL, the monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all perform-ance parameters.
Bass performance is equally impressive, thanks to ATC's 12" professional level bass driver that incorporates the company's unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers. ATC's active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
 
 
Active versus Passive
 
Active amplification has many advantages:
- Real active amplification means using a dedicated amplifier for each frequency band. Not to be confused by having one broad band amplifier built into the loudspeaker cabinet whilst still using passive crossovers.
- Active crossover filters (at the input of the amplifier) with phase correction ensure accurate timbre, excellent imaging and source location
- A flat magnitude response that is not changed with power input level results in excellent linear behaviour
- A 20dB improvement in intermodulation distortion (IMD). Reducing IMD is one of the major design goals when designing a loudspeaker system.
- Better controlled low frequency (due to optimal damping by the amplifier)
- A greater dynamic range for the same input power (no losses caused by a passive filter) 
...
meer informatie
€ Bel of Mail
ATC SCM100P SL Classic
The SCM100 ASL (active) and SCM100 SL (passive) are designed to perform at their best with the finest quality hi-fi equipment.
Like their smaller brother, the SCM50 ASL, the monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all perform-ance parameters.
 
Bass performance is equally impressive, thanks to ATC's 12? professional level bass driver that incorporates the company's unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers.
 
ATC's active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
 
In passive form, the SCM100 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the audio frequency range.
...
meer informatie
€ Bel of Mail
ATC SCM11
Speakers van wereld klasse
 
Onverslaanbaar in zn soort, zeer realistische weergave en onkende timing.
Door de gesloten kast een erg snelle en precieze weergave maar zonder gemis aan druk in het laag.
 
Binnenkort beluisterbaar in onze showrrom
 
Leverbaar in :
 
- Cherry vineer
- Black oak vineer
- Mat white
- Mat black
...
meer informatie
€ 1705,00
ATC SCM150A SL Classic
The SCM150 ASLT active is designed to perform at their best with the finest quality hi-fi equipment.
 
Like their smaller brothers, the SCM50 ASL & 100 the monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150s soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance. pararameters. Bass performance is equally impressive, thanks to ATC's 15" professional level bass driver that incorporates the company's unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers. ATC's active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
 
 
The SCM100 ASL active is designed to perform at their best with the finest quality hi-fi equipment.
 
Like their smaller brother, the SCM50A SL, the monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all perform-ance parameters.
Bass performance is equally impressive, thanks to ATC's 12" professional level bass driver that incorporates the company's unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers. ATC's active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
 
 
Active versus Passive
 
Active amplification has many advantages:

- Real active amplification means using a dedicated amplifier for each frequency band. Not to be confused by having one broad band amplifier built into the loudspeaker cabinet whilst still using passive crossovers.
- Active crossover filters (at the input of the amplifier) with phase correction ensure accurate timbre, excellent imaging and source location
- A flat magnitude response that is not changed with power input level results in excellent linear behaviour
- A 20dB improvement in intermodulation distortion (IMD). Reducing IMD is one of the major design goals when designing a loudspeaker system.
- Better controlled low frequency (due to optimal damping by the amplifier)
- A greater dynamic range for the same input power (no losses caused by a passive filter) 
...
meer informatie
€ Bel of Mail
ATC SCM150P SL Classic
The SCM150 ASL (active) and SCM150 SL (passive) are designed to perform at their best with the finest quality hi-fi equipment. Like their smaller brother, the SCM50 ASL & 100 the monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150s soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all perform-ance parameters. Bass performance is equally impressive, thanks to ATC's 15? professional level bass driver that incorporates the company's unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers. ATC's active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. In passive form, the SCM150 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the audio frequency range. SCM150SL (Passive) Drivers: HF 25mm Mid 75mm LF 375mm Super Linear Amplitude Linearity ±2dB: 60Hz – 17kHz Frequency Response -6dB: 25Hz & 22kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Sensitivity (sine wave): 91dB @ 1W @ 1m Max continuous SPL @1m: 117dB SPL Crossover Frequency: 380Hz & 3.5kHz Input Connector: Binding Posts/4mm banana plugs Recommended Power Amplifier: 100 to 1500 Watts Nominal Impedance: 8 ohms Cabinet Dimensions(HxWxD): 884 x 495 x 570mm (stands add 200mm to height) Weight: 57kg
...
meer informatie
€ 21.995,00
ATC SCM19
Beluisterbaar in onze showroom
 
Kom langs voor een vrijblijvende demo ( die U niet snel zult vergeten )
Wat ons betreft 1 van de beste luidsprekers in zijn klasse en veegt de vloer aan met veel van de ''vertrouwde'' merken.
 
 
ATC produceert alles in eigen beheer en is al jaren 1 van DE namen in de studiowereld.
 
Leverbaar in :
-Cherry vineer
-Black oak vineer
-Mat white
-Mat black
...
meer informatie
€ 2820,00
ATC SCM20P SL Classic
The hybrid design incorporates a 150mm bass cone on to which is grafted a 75mm soft dome. The magnet assembly utilises ATC's unique "SL" technology which greatly reduces distortion in moving coil drive units by a very significant 12-15dB (3rd harmonic). To minimise Time Domain Distortion both dome and cone are made from acoustically "dead" polyester wave material doped with ATC's own formulation. Not only does the SCM20SL reproduce bass with remarkable articulation and authority, it also has outstanding mid-band clarity, incredible dynamic range, and awesome power handling. Drivers: HF 25mm, Mid 75mm, LF 150mm Frequency Response -6dB: 60Hz – 20kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Max SPL: 108dB Crossover Frequency: 2.8kHz Input Connector: Bi-wire posts Recommended Amplifier Power (see ATC SIA2-150): 50-300 Watts Cabinet Dimensions(HxWxD): 440x239x333mm Weight: 22.7kg
...
meer informatie
€ Bel of Mail
ATC SCM50 SL Classic
The SCM50 ASL (active) and SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment. The monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9? bass driver incorporates ATC's unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range. Drivers: HF 25mm Mid 75mm LF 234mm Super Linear Amplitude Linearity ±2dB: 70Hz – 17kHz Frequency Response -6dB: 38Hz & 22kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Max continuous SPL @1m: 112dB SPL Crossover Frequency: 380Hz & 3.5kHz Input Connector: XLR Input Sensitivity:1V Input Impedance: >10k ohms balanced XLR Amplifier Output: HF 50 Watts RMS MF 100 Watts RMS LF 200 Watts RMS Overload Protection: LDR tweeter protection, plus active FET MGR (amplifiers) Power Requirements: Voltage: 100, 115, 230 (factory set) Frequency: 50/60Hz Power: Nominal 90 Watts, Driven 350 Watts Cabinet Dimensions(HxWxD): 717x304x480mm including amps Weight: 48.9kg SCM50SL (Passive) Drivers: HF 25mm Mid 75mm LF 234mm Super Linear Amplitude Linearity ±2dB: 70Hz – 17kHz Frequency Response -6dB: 40Hz & 22kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Sensitivity (sine wave): 85dB @ 1W @ 1m Max continuous SPL @1m: 112dB SPL Crossover Frequency: 380Hz & 3.5kHz Input Connector: Binding Posts/4mm banana plugs Recommended Power Amplifier: 100 to 1500 Watts Nominal Impedance: 8 ohms Cabinet Dimensions(HxWxD): 717x304x425mm Weight: 41.1kg
...
meer informatie
€ 12.750,00
ATC SCM50A SL Classic
The SCM50 ASL is designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment. The monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9" bass driver incorporates ATC's unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.
 
 
Active versus Passive
 
Active amplification has many advantages:
- Real active amplification means using a dedicated amplifier for each frequency band. Not to be confused by having one broad band amplifier built into the loudspeaker cabinet whilst still using passive crossovers.
- Active crossover filters (at the input of the amplifier) with phase correction ensure accurate timbre, excellent imaging and source location
- A flat magnitude response that is not changed with power input level results in excellent linear behaviour
- A 20dB improvement in intermodulation distortion (IMD). Reducing IMD is one of the major design goals when designing a loudspeaker system.
- Better controlled low frequency (due to optimal damping by the amplifier)
- A greater dynamic range for the same input power (no losses caused by a passive filter)
...
meer informatie
€ Bel of Mail
ATC SCM7
binnenkort bij ons in de showroom te beluisteren
 
Mini monitor van grootse klasse.
In dit formaat vind U geen betere luidspreker !
 
Leverbaar in :
 
- Cherry vineer
- Black oak vineer
- Mat White
- Mat Black
...
meer informatie
€ 1150,00
Centers - ATC
ATC C1C
ATC has developed two new centre channel speakers for multi-channel system applications. Available in two sizes and emulating their successful Entry Series SCM7 and SCM11 loudspeaker counterparts, the new C1C (V.3) design will deliver dynamic wide-bandwidth accuracy and outstanding vocal intelligibility at the centre of compact 5.1 channel ATC systems for audiophile film and music devotees.
 
 
Compatible Tweeters

Matching the monitors, the C1C driver systems feature ATC's acclaimed SH25-76 dual-suspension tweeter, designed and built in-house according to the brand's rigorous low-compromise regimen for exceptionally low distortion and an extended high frequency response. The tweeter's 15,000 gauss (1.5 tesla) neodymium magnet has a black heat-treated top plate, which dissipates heat away from the voice coil to maintain high power handling and low power compression. A precision-machined 5.5mm rigid alloy waveguide provides optimum dispersion, a flat on-axis frequency response and resonance-free operation.
 
 
Compatible Mid-Bass Drivers
 
In each centre-channel system the tweeter sits between two mid-bass drivers identical in design to those employed by the corresponding L/R main loudspeaker. The CIC utilises the highly linear 125mm ATC mid/bass driver of the SCM7, featuring a 45mm soft dome - exceptional for its horizontal dispersion of mid-band frequencies - and a huge 3.5kg high-energy magnet system, which includes a 45mm ribbon wire voice coil, meticulously milled and formed by ATC.
 
The new C1C system incorporate new crossovers developed from the SCM7 and SCM11 designs, involving metallised polypropylene capacitors, large air cored inductors and ceramic wire-round resistors to offer superior power handling and clarity. Consequently, and in common with the SCM7 and SCM11, the centre-channel systems exhibit an impedance curve free from low values and extreme phase angles, presenting an easy load for amplifiers of 75 to 300 watts. 
...
meer informatie
€ 985,00
ATC C3C
ATC has developed two new centre channel speakers for multi-channel system applications. Available in two sizes and emulating their successful Entry Series SCM7 and SCM11 loudspeaker counterparts, the new C3C (V.3) design will deliver dynamic wide-bandwidth accuracy and outstanding vocal intelligibility at the centre of compact 5.1 channel ATC systems for audiophile film and music devotees.
 
 
Compatible Tweeters

Matching the monitors, the C3C driver system feature ATC's acclaimed SH25-76 dual-suspension tweeter, designed and built in-house according to the brand's rigorous low-compromise regimen for exceptionally low distortion and an extended high frequency response. The tweeter's 15,000 gauss (1.5 tesla) neodymium magnet has a black heat-treated top plate, which dissipates heat away from the voice coil to maintain high power handling and low power compression. A precision-machined 5.5mm rigid alloy waveguide provides optimum dispersion, a flat on-axis frequency response and resonance-free operation.
 
 
Compatible Mid-Bass Drivers

In each centre-channel system the tweeter sits between two mid-bass drivers identical in design to those employed by the corresponding L/R main loudspeaker. The new C3C design uses the SCM11's CLD 150mm mid-bass driver incorporating a 45mm soft dome. Exclusive to ATC, Constrained Layer Damping offers reduced harmonic distortion between 300Hz and 3 kHz, an extended frequency response and improved off-axis performance.
 
 
Compatible Crossovers

The new C1C system incorporate new crossovers developed from the SCM7 and SCM11 designs, involving metallised polypropylene capacitors, large air cored inductors and ceramic wire-round resistors to offer superior power handling and clarity. Consequently, and in common with the SCM7 and SCM11, the centre-channel systems exhibit an impedance curve free from low values and extreme phase angles, presenting an easy load for amplifiers of 75 to 300 watts.
...
meer informatie
€ 1475,00
Eindversterker - ATC
ATC P1
"…if you want to hear the important musical detail presented in a coherent, clear-cut fashion this pairing has remarkably little competition in the two box arena. There are a few integrated amps which give them a run for their money in one respect or another but nothing comes to mind which seems like a better overall package."
Jason Kennedy, Hi Fi Plus No75
 
150W per channel
Class A/B operation
Hand built in the UK
True dual mono design
Balanced and unbalanced inputs
Amplifier link output
Remote control
6 year warranty
...
meer informatie
€ Bel of Mail
ATC P2
The P2 generates 300W/Ch - twice the power of its smaller P1 sibling! It will drive the most challenging loudspeakers with ATC's signature virtues of wide bandwidth and ultra-low distortion. The ATC P2 is a Dual-Mono design, keeping the power supplies, signal and return paths discreet. This approach ensures that the amplifier will achieve the maximum signal separation with minimal crosstalk, and that intermodulation between channels via the power supplies is reduced to an absolute minimum across a frequency range of 400kHz. It also means that the power delivery from one channel cannot affect the specified power available from the other.
 
New Top Cover/Lid Design

The lid/cover thickness has been increased by 30%. The result is stiffer and heavier and gives the 'feel' of high quality. The design of the venting has also been revised; the steel mesh covering the heatsink vents has been replaced by a beautiful acid-etched stainless steel insert. Not only does this component greatly enhance the amplifier visuals, it also reduces lid/cover vibration.
 
New Power Supply Design

The P2's power supply includes a massive, custom-made 400 VA low-noise transformer for each channel. The final design of these transformers is the result of seven design iterations with the goal of achieving best possible audio performance and lowest possible mechanical noise. This was achieved by using a very high grade steel core which is then vacuum impregnated with high temperature resin, post winding. The mains power 'soft-start' feature has also been revised, slowing the rate at which the unit powers up.
 
Overview

300W per channel
True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
Grounded source class A/B circuit topology as found in ATC's renowned active loudspeakers
Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients
No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability
Neutral fidelity ensures excellent product compatibility
Hand built in the UK and supported by a 6 year warranty 
...
meer informatie
€ Bel of Mail
ge´ntegreerde versterkers - ATC
ATC SIA2-150
The SIA2-150 is a high quality integrated amplifier designed to partner ATC passive monitors and other Loudspeaker systems. It incorporates five line level stereo inputs plus headphone jack, stereo record, pre and sub outputs on RCA phono sockets and one pair of loudspeaker outputs. Input selection is achieved via a rotary control. Output volume adjustment is achieved by a precision potentiometer. A tape monitor function is a duplicate of the source selected by the input selector. A standby function is also accessible from a front panel push button. Mains power is applied from a rear panel mounted switch. The SIA2-150 incorporates the same gain reduction and loudspeaker protection circuits as used in the ATC active monitors. This ensures that even working at very high levels the amplifier is held back from clipping so improving the subjective performance and protecting the loudspeakers from damage. All SIA2-150 functions are duplicated on the included ATC SCAR-B remote control handset.
 
 
150 watts per channel.
Class A/B operation.
Hand built in the UK.
5 RCA inputs.
Record, sub and pre outputs.
Headphone jack.
Remote control.
6 year warranty.
...
meer informatie
€ Bel of Mail