Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > Perreaux
Merken:
Accessoires - Perreaux
Perreaux eDAC
Digital Inputs
• 2 SPDIF Coax (BNC)
• 2 SPDIF Optical (Toslink)
• 1 USB (Type B)

Input Sample Rate
• 32, 44.1, 48, 88.2, 96, 176.4, 192kHz (Coax, Optical)
• 32, 44.1, 48kHz (USB)

Input Word Length (maximum)
• 24-bit (Coax, Optical)
• 16-bit (USB)

• Input Impedance: 75Ω (Coax)

Transformer Coupled
• Coax: Yes
• Optical: No
• USB: No

Analogue Section
• Digital to Analogue Conversion: 24-bit / 192kHz
• Output Voltage: 2.0Vrms @ 0dBFS
• Total Harmonic Distortion + Noise Typically 0.002%, 20Hz-20kHz @ 0dBFS
• Frequency Response 20Hz to 20kHz: +0.0dB, -0.1dB, 5Hz to 94kHz: +0.0dB, -3.0dB
• Dynamic Range (unweighted): better than 115dB @ 0dBFS
• Signal to Noise Ratio (unweighted): better than 115dB @ 0dBFS
• Channel Separation: better than 110dB @ 0dBFS
• Stop Band: 105kHz
• Stop Band Attenuation: 125dB

...
meer informatie
€ 999
Perreaux ePhono
Input Impedance
• Low Gain (MM): 47kΩ
• High Gain (MC): 100Ω

Gain
• Low Gain (MM): 40dB
• High Gain (MC): 60dB

Total Harmonic Distortion + Noise
• Typically: 0.002% @ 1kHz, low gain setting
• 20Hz to 20kHz: less than 0.010%, low gain setting

• RIAA Accuracy: ±0.5dB, 20Hz-20kHz
• Signal to Noise Ratio (unweighted): better than 85dB, low gain setting
• Input Capacitance: 22pF

...
meer informatie
€ 499
cd-spelers - Perreaux
Perreaux éloquence CDt
The CDt is a dedicated compact disc (CD) transport that delivers exceptional performance from the CD format. The CDt even plays MP3 files from disc.Over 30 years of experience crafting fine high end audio components is embodied within the éloquence CDt. The CDt extends our commitment to the CD format and our belief that it will remain a reference medium for years to come.

Trigger input and output
The Trigger Input allows the standby status of the CDt to be controlled by a remotely connected device, while the Trigger Output allows the standby status of a connected device to be controlled by the CDt. The standby status of the system can be set with the convenience of a single button.

Infrared (IR) input
The IR Input allows the CDt to use an external IR receiver to enable the unit to be conveniently located in a cabinet where line-of-sight to the IR recevier would ordinarily be blocked. The IR Input also allows the CDt to be directly connected to smart home system controllers from Xantech™, Niles™, etc.

Infrared (IR) output
The IR Output relays infrared commands received by the internal IR recevier on the front panel of the CDt or the IR Input on the rear panel. Connecting compatible devices to this output allows the CDt to pass through infrared commands to the connected device.

Smart Home Integration
The CDt can easily integrate into any smart home, using the RS-232 port at the rear of the amplifier and interfacing to devices from the likes of Control4™, AMX™ and Crestron™. Coupled with the IR Input and Trigger Input, smart home integration has never been easier.

Isolation Feet Options
To minimize vibrations, aftermarket "feet" can be easily attached if desired. Also, the éloquence has the ability to go from 4 feet to 3 feet to further ensure mechanical isolation.

...
meer informatie
€ 3599
Perreaux Prisma CD1
The Prisma Series CD1 is a reference, remote controlled, stereo CD player incorporating the latest in CD technology, providing extremely high quality sound and balanced output circuitry. All components have been stringently selected for their performance potential including Roderstein resistors and Black Gate capacitors in the analog stages. Tactile switches are provided on the front panel for all basic CD functions with additional convenience controls available on the full function remote control, including intro scan, repeat modes, programming, etc.
...
meer informatie
€ 4999
DACs - Perreaux
Perreaux Audiant DP32
The Audiant DP32 is a USB DAC preamplifier equipped with a 32-bit digital to analogue converter (DAC), fully balanced analogue audio circuits and ample input options – featuring AES/EBU digital input and balanced XLR analogue input along with asynchronous 24-bit/192kHz USB audio streaming.From its sleek, modern appearance to its transparent, extended, and engaging sonic presentation; the Audiant DP32 preamp is simply captivating. The sound is spacious and focused, resolving so much information but without brightness, grain or artefact. The Audiant DP32 USB DAC preamplifier is the perfect partner for the Audiant 100p stereo power amplifier. Whether as part of a complete Audiant system, or as the DAC preamp in your existing system – the DP32 will reconnect you with the MUSIC.

High resolution accuracy.
ESS Technology's 32-bit Sabre³² DAC with patented Hyperstream™ DAC architecture and Jitter Eliminator provides accurate sound reproduction.

Low jitter. Perfect timing.
Two stages of jitter reduction in the digital audio stream keep jitter to a minimum ensuring the delivery of your music is timed to perfection.

Pure. Emotion.
Ultra-low distortion provides transparent, detailed and accurate sound reproduction which captures the heart, soul and emotion of music.

Tonally correct.
The audio circuit has no capacitors in the signal path to introduce phase shift to the analgue signal – ensuring your music retains its purity and intended tonal balance.

Asynchronous. Detail. Transparency.
The asynchronous 24-bit/192kHz USB input allows the superior detail, dynamics and transparency of high definition music to be fully experienced.

Brings music to life.
The fully balanced audio signal allows true 24-bit dynamic range and retains the liveliness and sparkle of your music – bringing it to life.

Isolated digital inputs.
Electrically isolated digital inputs assure no ground loops and stop the power supply noise in source components from degrading the sound quality.

Clean. Noise-free.
Digital signals are kept clean and noise-free by discrete shunt regulators with high noise rejection, reducing jitter and allowing your music to shine.
 

...
meer informatie
€ 2699
Eindversterker - Perreaux
Perreaux Audiant 100P
The Audiant 100p is a no compromise 100W stereo power amplifier with balanced input and combines form and function to create a hugely satisfying amplifier. The MOSFET output transistors and high-current power supply give a potent, dynamic and sophisticated sonic signature; continuing the tradition of previous Perreaux pieces – engaging, purposeful and controlled. With 100W power output per channel, fully balanced input circuitry, shunt voltage regulation and power supply filtering; it is amazing what advancements are made in the level of transparency, detail and dynamics. The Audiant 100p stereo power amplifier raises the bar on what is possible in this category. The Audiant 100p stereo power amplifier is the perfect partner for the Audiant DP32 USB DAC preamplifier. Whether as part of a complete Audiant system, or as the power amplifier in your existing system – the 100p will reconnect you with the MUSIC.

Powerful. Effortless delivery
The custom transformer and high-current power supply allows dynamic music to sound natural, spacious and free from compression.

Depth and space
Filtered power supplies isolate the input and voltage stages from noise of the output stage bringing depth and a sense of space to your music.

Monocoque stability
The CNC machined aluminum monocoque cover is stunning and provides unprecedented mechanical stability while serving as a substantial heat sink.

Pure. Emotion
Low distortion provides transparent, detailed and accurate sound reproduction which captures the heart, soul and emotion of music.

Musical. Reliable
High power MOSFET transistors from Toshiba provide a musical valve-like sound and retain the reliability, durability and consistency of solid state.

Audio-grade. Naturally
The audio-grade capacitors have been meticulously selected to give a natural and open sound that is highly detailed without grain or harshness.

Enjoyment for life
Sophisticated protection circuitry gives confidence and reassurance that your investment will provide a lifetime of trouble-free enjoyment.

Dynamic. Explosive sound
The fully balanced audio signal makes dynamic musical transients explode from the quiet and noise-free musical background – your music will never sound so alive.

...
meer informatie
€ 2499
Perreaux Prisma 350
TThe Prisma 350 is a 350W per-channel stereo power amplifier. The high power output allows the 350 to effortlessly drive any loudspeakers with the precision, detail and authority that Perreaux products are renowned for. The ability to extend deep into the lower octaves with control and finesse delivers instruments and voices with lifelike heft, body and scale. Sonic transparency is deep at the heart of the 350, allowing the musicians artistic prowess to be realised in its entirety and as intended by the mastering engineer. As with all Perreaux products, the design is completely solid state, featuring the finest audiophile grade componentry throughout.

Rugged Build Quality
Mechanical strength has been a hallmark of Perreaux products since the company first started production back in 1974. The concept behind the physical design and construction is that each structural member should contribute to both rigidity and performance.

Ultra Stiff Power Supply
The 350 incorporates a massive custom designed, toroidal power transformer, employing unusually heavy gauge wire that reduces copper losses to a minimum. An electrostatic shield prevents AC line borne interference from entering the signal path. The power supply filter capacitors, totaling 60,000uF (30,000uF per channel), have exceptionally low inductance and internal resistance. They charge and discharge in response to load demand far more rapidly than conventional storage capacitors and are capable of delivering the instantaneous current required by the output stages, providing optimum dynamic range and transient response. The wiring from the power supplies to the output boards is designed for unimpeded transmission of the required current and voltage and utilizes heavy gauge, tinned copper wire cables. Since power supply leads radiate at signal frequencies, all wiring is carefully loomed to minimise this effect.

Hybrid Class-A/AB
The bi-polar transistors used in the 350 are operating in Class-A. This avoids the crossover notch distortion and the resulting odd-order harmonics present, to some degree, in all other classes of operation. The devices used in the 350 output stage are MOSFETs, which with high quiescent current circuitry, are run in the equivalent of Class-A to 10 watts. Beyond this point the output class is technically Class AB (hence the hybrid nomenclature), but with a major difference. The combination of MOSFET characteristics and their application in this circuitry, result in crossover distortion so minimal that it is virtually non-existent.

MOSFET Output Stage
The 350 output stage takes full advantage of the unique qualities of MOSFET devices and in many ways they are superior to bi-polar transistors. A major advantage is their tendency to draw less current over a large section of the power bandwidth as their temperature rises (Negative Temperature Coefficient), hence self stabilising thermally, whereas bi-polar transistors draw more current as their temperature rises (Positive Temperature Coefficient) and protection circuits become mandatory to prevent thermal runaway and eventual self destruction. MOSFETs have the ability to swing fully across the amplifier’s internal DC voltage and are therefore true "rail-to-rail" devices. Using MOSFETs encourages the highest performance from the balance of the internal amplifier circuitry.

Multiple Protection Systems
The 350 incorporates a full range of protection circuits, isolated from all signal carrying circuits via opto-couplers. However, these circuits are aimed at ensuring an extremely high safety margin for these high-powered products rather than as a mandatory addition to correct for poor or overloaded circuit topologies.

Earthing
We pay particular attention to designing the product to ensure maximum separation between internal signal and power earths, only meeting at a central starred point.

Highest Quality PCBs and Components
Quality fiberglass PCBs, featuring heavy copper tracks and high-grade components, are used throughout the 350.

Bi-Wiring Made Easy
2 pairs of binding posts per channel make bi-wiring speakers as simple as "A-B-C".

...
meer informatie
€ 6999
Perreaux Prisma 750
The Prisma Series 750 is a high quality, reference, 750W monoblock hi fi audio power amplifier, incorporating true-balanced circuit topology and custom designed toroid power supply.

Rugged Build Quality
Mechanical strength has been a hallmark of Perreaux products since the company first started production back in 1974. The concept behind the physical design and construction is that each structural member should contribute to both rigidity and performance.

Ultra Stiff Power Supply
The 750 incorporates a massive custom designed, toroidal power transformer, employing unusually heavy gauge wire that reduces copper losses to a minimum. An electrostatic shield prevents AC line borne interference from entering the signal path. The power supply filter capacitors, totaling 60,000uF, have exceptionally low inductance and internal resistance. They charge and discharge in response to load demand far more rapidly than conventional storage capacitors and are capable of delivering the instantaneous current required by the output stages, providing optimum dynamic range and transient response. The wiring from the power supplies to the output boards is designed for unimpeded transmission of the required current and voltage and utilizes heavy gauge, tinned copper wire cables. Since power supply leads radiate at signal frequencies, all wiring is carefully loomed to minimise this effect.

Hybrid Class-A/AB
The bi-polar transistors used in the 750 are operatin in Class-A. This avoids the crossover notch distortion and the resulting odd-order harmonics present, to some degree, in all other classes of operation. The devices used in the 750 output stage are MOSFETs, which with high quiescent current circuitry, are run in the equivalent of Class-A to 10 watts. Beyond this point the output class is technically Class-AB (hence the hybrid nomenclature), but with a major difference. The combination of MOSFET characteristics and their application in this circuitry, result in crossover distortion so minimal that it is virtually non-existent.

Bi-Wiring Made Easy
2 pairs of binding posts make bi-wiring speakers as simple as "A-B-C".

MOSFET Output Stage
The 750 output stage takes full advantage of the unique qualities of MOSFET devices and in many ways they are superior to bi-polar transistors. A major advantage is their tendency to draw less current over a large section of the power bandwidth as their temperature rises (Negative Temperature Coefficient), hence self stabilising thermally, whereas bi-polar transistors draw more current as their temperature rises (Positive Temperature Coefficient) and protection circuits become mandatory to prevent thermal runaway and eventual self destruction. MOSFETs have the ability to swing fully across the amplifier’s internal DC voltage and are therefore true "rail-to-rail" devices. Using MOSFETs encourages the highest performance from the balance of the internal amplifier circuitry.

Multiple Protection Systems
The 750 incorporates a full range of protection circuits, isolated from all signal carrying circuits via opto-couplers. However, these circuits are aimed at ensuring an extremely high safety margin for these high-powered products rather than as a mandatory addition to correct for poor or overloaded circuit topologies.

Soft Start
The 750 utilises soft start circuitry to protect the fuses and/or circuit breakers in your home’s mains power supply. Without this circuit, the huge inrush current required to charge the 60,000uF of power supply capacitance, would blow the fuses or trip the circuit breakers.

Earthing
We pay particular attention to designing the product to ensure maximum separation between internal signal and power earths, only meeting at a central starred point.

Highest Quality PCBs and Components
Quality fiberglass PCBs, featuring heavy copper tracks and high quality audiophile grade components, are used throughout the 750.

...
meer informatie
€ 6999
geïntegreerde versterkers - Perreaux
Perreaux Audiant 80i
The Audiant 80i stereo integrated amplifier is equipped with asynchronous USB input and delivers 80W of high quality Perreaux power per channel. Audiant 80i features eight stereo inputs, including asynchronous USB, coaxial & optical digital inputs, along with a MM phono input for a turntable and a selectable home theatre loop. Incorporating an upsampling 24-bit/96kHz digital to analogue converter (DAC), Audiant 80i uses ESS Technology's Reference Sabre ES9006 DAC for accurate sound reproduction of all your digital sources. With listening, we realised that Audiant 80i was proof positive that our core philosophy is correct. Form and function combines to create a hugely satisfying amplifier. The appearance is aesthetically forward-thinking while the sound continues the tradition of previous Perreaux pieces – engaging, purposeful and controlled. Since 1974 Perreaux have been manufacturing high fidelity components of exceptional quality in New Zealand. Audiant proves again, that commitment and passion can triumph over geography and high expectations. The elegant implementation of MOSFET output devices and Class-A signal stages give Audiant 80i a potent, dynamic and sophisticated sonic signature. Merge our high musical standards with the versatile features of Audiant and you have an amplifier ready for now, and the future. A variety of digital inputs enable you make the most of the superb 24-bit/96kHz Digital to Analogue Converter (DAC). You can ease Audiant into a home theatre system to extract any missing detail from your cinema experience. Or you can put the needle on the record with the knowledge that the phono stage has been extensively tested by our music obsessed team in the deep south. Once again Perreaux bring you a ground-breaking amplifier that will reconnect you to the thing that is, in these busy days, so often overlooked – the MUSIC.

Asynchronous USB input
Stream audio directly from a computer via the 24-bit/96kHz asynchronous USB input and experience the full potential of today's high definition music.

Touch button interface
The touch button interface utilises capacitive touch technology to provide an intuitive interface which complements the design aesthetic.

Dimmable display
The LED backlighting of the touch panel can be dimmed to suit your listening environment.

Transformer Coupled Digital Input
The coaxial digital input is transformer coupled, providing electrical isolation and improved jitter performance for coaxial digital source components.

Home theatre input
Integrate Audiant 80i into a home theatre system using the home theatre input.

High-current toroidal power supply
The high-current power supply, with custom designed toroidal transformer, delivers bass with punch and authority.

Control iTunes via USB
When using the USB input, the Audiant remote can control iTunes or similar music applications, such as Windows Media Player.

Infrared remote control
The infrared remote control allows wireless control of Audiant 80i.

Digital inputs
A variety of digital inputs allow connection to all of todays digital sources.

Phono input
Connect a record player to the phono input to enjoy some of the many quality pressings available on vinyl today.

Class-AB amplifier
The Class-AB amplifier output stage allows environment friendly energy requirements without compromising sound quality.

MOSFET output devices
MOSFET output devices are at the heart of all Perreaux amplifiers and provide a detailed and dynamic sound that embodies the soul of the music.

Upsampling digital to analogue converter
The on-board Audiant 80i upsampling 24-bit/96kHz digital to analogue converter (DAC) enables high fidelity sound from any digital source.

1 Watt Standby power consumption
With power consumption below 1 Watt in standby, Audiant 80i is one of the most energy conscious hi fi amplifiers available today.

...
meer informatie
€ 2799
Perreaux éloquence 150i
The 150i is a compact integrated amplifier with big attitude. It has been designed with precision engineering using the latest in technological advances to ensure seamless integration into any system. The 150i won't disappoint. Optional internal 24-bit/192kHz Digital to Analogue Converter (DAC) and Moving Magnet/Moving Coil (MM/MC) Phono Preamplifier modules ensure complete integration of digital source components (such as network music servers and set-top digital receivers), as well as turntables, into a high-performance system.

High Power Design
The 150i is designed to handle difficult speaker loads with ease. With it's high powered MOSFET design, the 150i is capable of continuously delivering a genuine 190Wrms into an 8Ω load and a huge 300Wrms into 4Ω.

High-current Custom Power Supply
At the heart of any great amplifier is a great power supply. The 150i features 2 high current independent power supplies, for controlled, quality audio.

High Damping Factor
The éloquence 150i's performance features a high damping factor. Ensuring absolute authority and control of any loudspeaker.

Advanced Microprocessor Control
The extensive range of user functions and complex functions are managed by a powerful onboard microprocessor. This gives you more control but is electrically isolated from the audio paths, ensuring faithful sound reproduction.

Advanced Stepped Volume Control
3rd generation microprocessor controlled analogue volume control. The eloquence has advanced all the benefits of a pure unaltered analogue signal path which is merely "switched" to your exact desired volume. This gives you convenience and complete control with the cleanest signal path possible.

Advanced Lossless Stepped Off-Set Balance Control
3rd generation microprocessor controlled analogue balance control. There is no loss of music quality due to the left and right volume controls being analogue "switched" independently without added circuitry. This is the ultimate in allowing you to perfectly adjust the balance volume left or right without signal loss.

Non-Invasive Protection
The 150i features sophisticated microprocessor protection for the amplifier and connected load. The protection covers over-current, over-temperature, DC offset, internal AC supply and DC fuse protection. The protection is non-invasive and does not degrade the signal path.

Balanced (XLR) input
For use with balanced sources. Enabling you to take full advantage of the benefits of balanced audio.

Home Theatre/Pass-Through Loop
Allows the integration of the éloquence into a home theatre/external system as a two channel power amp, then back to full a stereo integrated for music listening.

IR (infrared) input and output
Enables additional remote control options to be connected and controlled by the éloquence Integrated Amplifier.

Isolation Feet Options
To minimize vibrations, aftermarket "feet" can be easily attached if desired. Also, the éloquence has the ability to go from 4 feet to 3 feet to further ensure mechanical isolation

...
meer informatie
€ 5699
Perreaux éloquence 250i
The 250i is Perreaux's most powerful, most sophisticated integrated amplifier. It's performance and specifications are truly impressive, but hearing the 250i is when you will truly appreciate the quality engineering, design and craftsmanship. The 250i is the most advanced integrated amplifier Perreaux has ever produced. Optional internal 24-bit/192kHz Digital to Analogue Converter (DAC) and Moving Magnet/Moving Coil (MM/MC) Phono Preamplifier modules ensure complete integration of digital source components (such as network music servers and set-top digital receivers), as well as turntables, into a high-performance system.

High Power Design
The 250i is designed to handle difficult speaker loads with ease. With it's high powered MOSFET design, the 250i is capable of continuously delivering a genuine 360Wrms into an 8Ω load and a huge 530Wrms into 4Ω.

High-current Custom Power Supply
At the heart of any great amplifier is a great power supply. 3 separate transformers feeding 4 independent power supplies ensure the 250i will drive difficult speakers with ease, producing controlled, quality audio.

High Damping Factor
The éloquence 250i's performance features a high damping factor. Ensuring absolute authority and control of any loudspeaker.

Advanced Microprocessor Control
The extensive range of user functions and complex functions are managed by a powerful onboard microprocessor. This gives you more control but is electrically isolated from the audio paths, ensuring faithful sound reproduction.

Advanced Stepped Volume Control
3rd generation microprocessor controlled analogue volume control. The éloquence has advanced all the benefits of a pure unaltered analogue signal path which is merely "switched" to your exact desired volume. This gives you convenience and complete control with the cleanest signal path possible.

Advanced Lossless Stepped Off-Set Balance Control
3rd generation microprocessor controlled analogue balance control. There is no loss of music quality due to the left and right volume controls being analogue "switched" independently without added circuitry. This is the ultimate in allowing you to perfectly adjust the balance volume left or right without signal loss.

Non-Invasive Protection
The 250i features sophisticated microprocessor protection for the amplifier and connected load. The protection covers supply (soft-charge), over-current, over-temperature, DC offset, internal AC supply and DC fuse protection. The protection is non-invasive and does not degrade the signal path.

Internal Headphone Amplifier
The headphone amplifier gives the user all the benefits of the 250i's engineering and design advances, with the convenience of headphones.

Dual sets of speaker binding posts
For ease of bi-wiring loudspeakers and enhanced sound quality.

Balanced (XLR) input
For use with balanced sources. Enabling you to take full advantage of the benefits of balanced audio.

Home Theatre/Pass-Through Loop
Allows the integration of the éloquence into a home theatre/external system as a two channel power amp, then back to full a stereo integrated for music listening.

iPod Input
Plug your iPod directly into the front panel for convenient iPod connectivity.

IR (infrared) input and output
Enables additional remote control options to be connected and controlled by the éloquence Integrated Amplifier.

Trigger input and output
Allows the 250i to have standby contol over, or be controlled by, connected equipment. Offering high system integration and convenience.

Isolation Feet Options
To minimize vibrations, aftermarket "feet" can be easily attached if desired. Also, the éloquence has the ability to go from 4 feet to 3 feet to further ensure mechanical isolation

...
meer informatie
€ 8299
voorversterker - Perreaux
Perreaux Prisma SM6 mkII
The Prisma Series SM6 MkII Balanced Stereo Preamplifier is a fully balanced hi fi audio stereo preamplifier. Utilising discrete Class-A signal and line stages in a fully balanced topology, the SM6 MkII presents music with the realism of the performance itself. With six separate regulated power supplies the sensitive analog stages are isolated from all power supply artifacts, allowing dynamic transient attacks to appear from a black background. The wide frequency response of the SM6 MkII enables the entire audio spectrum to be portrayed in an articulate manner, ensuring you’re not left guessing. As with all Perreaux products, the design is completely solid state, featuring the finest audiophile grade components throughout.

True balanced input and output for improved noise rejection and cancellation
The SM6 MkII is a fully balanced stereo preamplifier, from input to output. The positive and negative halves of the signal never touch. This is very rare and only the highest quality hi fi audio preamplifiers have this architecture.

Four discrete line stages running in Class-A
The Class-A line stages have been designed to provide output buffering, so the user can drive low impedance loads over long cable lengths using any cable, without affecting the quality of the audio signal.

Six separate regulated power supplies
There is a separate power supply for each section of the preamplifier; one for each of the volume control ICs (one IC is used for each of the left and right channels to keep the system fully balanced and, therefore to maintain separation each IC is supplied with it’s own separate power supply), another one for each of the output buffering stages (once again because the SM6 MkII runs a fully balanced system, this means that there are two separate output buffer stages), yet another to power the digital logic and the final power supply looks after the input and output relays. The advantage of is that there is complete isolation from stage to stage, and most importantly digital noise is completely kept from infecting the analog audio section.

Wireless remote control of all functions
Many audiophile hi fi audio components are still provided with analog controls that are adjusted on the faceplate of the unit. While total control from the remote is common practice in standard products, it is not yet widely utilised on many high-end audio systems. Obvious advantage is that you don’t have to get out of your chair to make an adjustment.

Home Theatre Bypass
The SM6 MkII features a direct input (processor loop), which bypasses the preamplifier for use in a home theatre system.

Earthing
We pay particular attention to designing the product to ensure maximum separation between internal signal and power earths, only meeting at a central starred point.

Premium grade components used throughout
Wima signal capacitors, custom wound multi tap epoxy potted toroidal control transformer directly soldered to the PCB, highest quality fiberglass PCB allowing special treatment to be given to earth planes and layout with minimum dielectric, hand soldered through-hole mounted components.

Precision digitally controlled analog resistor ladder volume control
The SM6 MkII uses two digitally controlled resistor ladder volume controls. This is because we treat the positive and negative parts of the signal separately (true balanced system). The advantages of using a digitally controlled analog resistor ladder to adjust volume are - precise control, no contacts to corrode creating wiper noise and no analog component drift.

Input switching via high quality relays
Any manufacturer who uses a comprehensive remote control will use relays. However, Perreaux employs the use of high quality relays with gold plated silver contacts, thereby further lessening the chance of degrading the audio signal.

Dual preamp level outputs
You do not need to purchase an RCA style splitter if you want to drive two separate audio power amplifiers simultaneously (for example in a bi-amp situation) or if you wish to include a subwoofer in your system, as there are dual preamp outputs.

High quality PCBs
Quality PCBs featuring heavy copper tracks and components are used throughout the unit.

Remote Trigger Outputs
Dual 5V remote trigger outputs are provided to allow connected components to be powered ON or OFF as the SM6 MkII is taken in and out of standby.

...
meer informatie
€ 4599