Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > Audiolab > Audiolab 8200A
Audiolab
Audiolab 8200A - geïntegreerde versterkers
€ 999
geintegreerde stereo versterker met systeem-afstandsbediening. Vermogen 2x 60 Watt RMS bij 8 Ohm. Frequentiebereik 20 - 20.000 Hz +/- 0,5dB. Piekstroomwaarde van 25 Ampere, waarmee hij ook moeilijke luidsprekerbelastingen aankan. Uiteindelijk afgeleid van de legendarische 8000A – toen alom geroemd als toonaangevend product met de charme van de eenvoud. De nieuwe 8200A toont nog steeds eenvoudig, maar is wel opnieuw ontworpen op basis van de beste huidige componenten. Deze nieuwste uitvoering is flexibel inzetbaar als voortrap of geintegreerde versterker, en maakt daarmee eventuele latere opwaardering mogelijk naar separate eindversterkers of zelfs mono-blokken.
Specificaties

Eigenschappen

  • Frequency Response: CD, TUNER, AUX, VIDEO, TAPE1, TAPE2 and POWEP AMP: 20Hz-20kHz±0.5Db; 1Hz-65kHz-3dB
  • Total Harmonic Distortion & Noise: Less than 0.07%
  • Channel Balance: Within 1dB
  • Channel Separation: Better than 60dB@1 kHz any input
  • Crosstalk: Better than 80dB@1 kHz
  • Polarity (phase): Non-inverting for all inputs and outputs
  • Pre-amp Output: PRE OUT 1and PRE OUT 2: Output Impedance l00O Maximum Output>7.3V RMS
  • Headphone Output: Output impedance: 330O(Suitable for headphones 8O-2kO impedance)
  • Record Output: VIDEO OUT,TAPE 1 OUT, TAPE2 OUT: Output impedance: 1kO
  • Gain from input to record output 0dB(x1)
  • Muting: Muting controlled manually or automatically
  • Operating Temperature Range: 10-35c
  • Power Requirements (Depending on Region): 220-230V model
  • Maximum Power Consumption: 440VA
  • Dimensions (WXHXD): 445x74x335 mm - including feet, terminals and controls
  • 445x64x302 mm - excluding feet, terminals and controls
  • Weight: Net: 7.4kg; Shipping: 8.8kg
 

Specificaties

  • Frequency Response: CD, TUNER, AUX, VIDEO, TAPE1, TAPE2 and POWEP AMP: 20Hz-20kHz±0.5Db; 1Hz-65kHz-3dB
  • Total Harmonic Distortion & Noise: Less than 0.07%
  • Channel Balance: Within 1dB
  • Channel Separation: Better than 60dB@1 kHz any input
  • Crosstalk: Better than 80dB@1 kHz
  • Polarity (phase): Non-inverting for all inputs and outputs
  • Pre-amp Output: PRE OUT 1and PRE OUT 2: Output Impedance l00O Maximum Output>7.3V RMS
  • Headphone Output: Output impedance: 330O(Suitable for headphones 8O-2kO impedance)
  • Record Output: VIDEO OUT,TAPE 1 OUT, TAPE2 OUT: Output impedance: 1kO
  • Gain from input to record output 0dB(x1)
  • Muting: Muting controlled manually or automatically
  • Operating Temperature Range: 10-35c
  • Power Requirements (Depending on Region): 220-230V model
  • Maximum Power Consumption: 440VA
  • Dimensions (WXHXD): 445x74x335 mm - including feet, terminals and controls
  • 445x64x302 mm - excluding feet, terminals and controls
  • Weight: Net: 7.4kg; Shipping: 8.8kg