Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > Perreaux > Perreaux éloquence 150i
Perreaux
Perreaux éloquence 150i - geïntegreerde versterkers
€ 5699
The 150i is a compact integrated amplifier with big attitude. It has been designed with precision engineering using the latest in technological advances to ensure seamless integration into any system. The 150i won't disappoint. Optional internal 24-bit/192kHz Digital to Analogue Converter (DAC) and Moving Magnet/Moving Coil (MM/MC) Phono Preamplifier modules ensure complete integration of digital source components (such as network music servers and set-top digital receivers), as well as turntables, into a high-performance system.

High Power Design
The 150i is designed to handle difficult speaker loads with ease. With it's high powered MOSFET design, the 150i is capable of continuously delivering a genuine 190Wrms into an 8Ω load and a huge 300Wrms into 4Ω.

High-current Custom Power Supply
At the heart of any great amplifier is a great power supply. The 150i features 2 high current independent power supplies, for controlled, quality audio.

High Damping Factor
The éloquence 150i's performance features a high damping factor. Ensuring absolute authority and control of any loudspeaker.

Advanced Microprocessor Control
The extensive range of user functions and complex functions are managed by a powerful onboard microprocessor. This gives you more control but is electrically isolated from the audio paths, ensuring faithful sound reproduction.

Advanced Stepped Volume Control
3rd generation microprocessor controlled analogue volume control. The eloquence has advanced all the benefits of a pure unaltered analogue signal path which is merely "switched" to your exact desired volume. This gives you convenience and complete control with the cleanest signal path possible.

Advanced Lossless Stepped Off-Set Balance Control
3rd generation microprocessor controlled analogue balance control. There is no loss of music quality due to the left and right volume controls being analogue "switched" independently without added circuitry. This is the ultimate in allowing you to perfectly adjust the balance volume left or right without signal loss.

Non-Invasive Protection
The 150i features sophisticated microprocessor protection for the amplifier and connected load. The protection covers over-current, over-temperature, DC offset, internal AC supply and DC fuse protection. The protection is non-invasive and does not degrade the signal path.

Balanced (XLR) input
For use with balanced sources. Enabling you to take full advantage of the benefits of balanced audio.

Home Theatre/Pass-Through Loop
Allows the integration of the éloquence into a home theatre/external system as a two channel power amp, then back to full a stereo integrated for music listening.

IR (infrared) input and output
Enables additional remote control options to be connected and controlled by the éloquence Integrated Amplifier.

Isolation Feet Options
To minimize vibrations, aftermarket "feet" can be easily attached if desired. Also, the éloquence has the ability to go from 4 feet to 3 feet to further ensure mechanical isolation

Specificaties

User Controls
• Interactive Menu System
• Infrared (IR) Remote Control
• Volume Up/Down

I/O Compliment
• 1 pair Balanced Inputs (XLR)
• 4 pairs Unbalanced Inputs (RCA)
• 1 pair Unbalanced Line Outputs (RCA)
• 1 pair Unbalanced Preamplifier Outputs (RCA)
• 2 pairs Binding Posts per channel
• 1 Trigger output (3.5mm jack)
• 1 External IR input (3.5mm jack)
• 1 IR output (3.5mm jack)
• 1 RS232 serial port (RJ45)


 

Preamplifier Section
• Input Impedance Unbalanced: 12kΩ, Balanced: 22kΩ
• Input Overload Unbalanced: 8Vrms, Balanced: 8Vrms
• Volume Control Range: -95.5dB to +31.5dB
• Volume Control Resolution: 0.5dB per step
• Input Volume Trim Range: ±40dB
• Balance Resolution: 0.5dB
• Balance Range: ±40dB

Power Amplifier Section
• Rated Power Output (per channel): 150W into 8Ω, 300W into 4Ω
• Maximum Power Output (prior to clipping, per channel): 190W into 8Ω, 310W into 4Ω
• Total Harmonic Distortion + Noise:
  Typically: 0.002% @ 1kHz, 150W into 8Ω
  20Hz to 20kHz: 0.040%, 150W into 8Ω
• Frequency Response 20Hz to 20kHz: +0.00dB, -0.15dB, 5Hz to 60kHz:+0.00dB, -0.50dB
• Damping Factor: 800 @ 1kHz, 150W into 8Ω
• Signal to Noise Ratio (unweighted): better than 96dB, ref. 150W

Dimensions
• Width: 426mm (16.8")
• Depth: 344mm (13.5")
• Height: 102mm (4")
• Weight: 17kg (37.4 lb)