Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > Perreaux > Perreaux Prisma SM6 mkII
Perreaux
Perreaux Prisma SM6 mkII - voorversterker
€ 4599
The Prisma Series SM6 MkII Balanced Stereo Preamplifier is a fully balanced hi fi audio stereo preamplifier. Utilising discrete Class-A signal and line stages in a fully balanced topology, the SM6 MkII presents music with the realism of the performance itself. With six separate regulated power supplies the sensitive analog stages are isolated from all power supply artifacts, allowing dynamic transient attacks to appear from a black background. The wide frequency response of the SM6 MkII enables the entire audio spectrum to be portrayed in an articulate manner, ensuring you’re not left guessing. As with all Perreaux products, the design is completely solid state, featuring the finest audiophile grade components throughout.

True balanced input and output for improved noise rejection and cancellation
The SM6 MkII is a fully balanced stereo preamplifier, from input to output. The positive and negative halves of the signal never touch. This is very rare and only the highest quality hi fi audio preamplifiers have this architecture.

Four discrete line stages running in Class-A
The Class-A line stages have been designed to provide output buffering, so the user can drive low impedance loads over long cable lengths using any cable, without affecting the quality of the audio signal.

Six separate regulated power supplies
There is a separate power supply for each section of the preamplifier; one for each of the volume control ICs (one IC is used for each of the left and right channels to keep the system fully balanced and, therefore to maintain separation each IC is supplied with it’s own separate power supply), another one for each of the output buffering stages (once again because the SM6 MkII runs a fully balanced system, this means that there are two separate output buffer stages), yet another to power the digital logic and the final power supply looks after the input and output relays. The advantage of is that there is complete isolation from stage to stage, and most importantly digital noise is completely kept from infecting the analog audio section.

Wireless remote control of all functions
Many audiophile hi fi audio components are still provided with analog controls that are adjusted on the faceplate of the unit. While total control from the remote is common practice in standard products, it is not yet widely utilised on many high-end audio systems. Obvious advantage is that you don’t have to get out of your chair to make an adjustment.

Home Theatre Bypass
The SM6 MkII features a direct input (processor loop), which bypasses the preamplifier for use in a home theatre system.

Earthing
We pay particular attention to designing the product to ensure maximum separation between internal signal and power earths, only meeting at a central starred point.

Premium grade components used throughout
Wima signal capacitors, custom wound multi tap epoxy potted toroidal control transformer directly soldered to the PCB, highest quality fiberglass PCB allowing special treatment to be given to earth planes and layout with minimum dielectric, hand soldered through-hole mounted components.

Precision digitally controlled analog resistor ladder volume control
The SM6 MkII uses two digitally controlled resistor ladder volume controls. This is because we treat the positive and negative parts of the signal separately (true balanced system). The advantages of using a digitally controlled analog resistor ladder to adjust volume are - precise control, no contacts to corrode creating wiper noise and no analog component drift.

Input switching via high quality relays
Any manufacturer who uses a comprehensive remote control will use relays. However, Perreaux employs the use of high quality relays with gold plated silver contacts, thereby further lessening the chance of degrading the audio signal.

Dual preamp level outputs
You do not need to purchase an RCA style splitter if you want to drive two separate audio power amplifiers simultaneously (for example in a bi-amp situation) or if you wish to include a subwoofer in your system, as there are dual preamp outputs.

High quality PCBs
Quality PCBs featuring heavy copper tracks and components are used throughout the unit.

Remote Trigger Outputs
Dual 5V remote trigger outputs are provided to allow connected components to be powered ON or OFF as the SM6 MkII is taken in and out of standby.

Specificaties

User Controls
• Infrared (IR) Remote Control
• Alphanumeric Display
• Simple User Interface
• Remote Trigger Outputs
• Balanced/Unbalanced Selector

I/O Compliment
• 6 pairs Unbalanced Inputs (RCA)
• 1 pair Balanced Inputs (XLR)
• 2 pairs Unbalanced Preamp Outputs (RCA)
• 1 pair Balanced Preamp Outputs (XLR)
• 2 pairs Unbalanced Line Outputs (RCA)

Rated Output
• Unbalanced: 1.5Vrms
• Balanced: ±1.5Vrms

Total Harmonic Distortion (THD+N)
• Typically: 0.001% @ 1kHz
• 20Hz to 20kHz: <0.004%

Frequency Response  20Hz to 20kHz
• ±0.15dB

Signal to Noise Ratio: 95dB, referenced to rated output
• Dynamic Range: 110dB

Input Impedance
• Unbalanced: 10kΩ
• Balanced: 20kΩ

Input Sensitivity
• Unbalanced: 215mV
• Balanced: 215mV

Phase Accuracy
• ±0.5º, 20Hz-20kHz

Dimensions
• Width 430mm (16.9")
• Height 106mm (4.2")
• Depth 323mm (12.7")
• Weight: 7.7kg (17.0lb)