Home page Over ons Home Hifi Car hifi occasions
U bevind zich hier:  Home HiFi > Pro-Ject Audio > Pro-Ject Audio 2-Xperience Acryl DC
Pro-Ject Audio
Pro-Ject Audio 2-Xperience Acryl DC - Platenspeler
€ Bel of Mail
De nieuwe Pro-Ject 2Xperience Acryl DC is uitgevoerd met een perspex console en is voorzien van de buitengewoon fraaie PJ-9CC carbonfiber toonarm. Deze draaitafel wordt geleverd met schroefbare platenklem en stevig scharnierende stofkap. Zonder element.
 
Highlights:

- In hoogte verstelbare 9inch Carbon fiber toonarm uit één stuk,
- In hoogte verstelbare sorbothaan gedempte conische voetjes,
- snaar aangedreven sandwhich draaiplateau (voorzien van vinyl toplaag) met schroefbare platenklem, geschikt voor 33 en 45 toeren (handmatig)
- premium asynchrone aandrijfmotor voorzien van robuuste behuizing en quartz gestuurde motorsturing voor zeer precieze gelijkloop.
- Inclusief stofkap
 
Optie: nu tevens verkrijgbaar met ortofon 2M-silver element.
Specificaties
Turntable
 
∎ A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.
∎ The transparent acrylic plinth stands on three height-adjustable Sorbothane ® -damped aluminium cones.
∎ The motor is decoupled from the plinth to reduce vibration transmission.
∎ The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
∎ The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.
∎ Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
∎ External power supply avoids potential electro-mechanical interference.
 
Tonearm Pro-Ject 9c
 
∎ Conical carbon-fibre armtube avoids standing wave reflections.
∎ Low mass aluminium headshell securely glued to armtube.
∎ The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
∎ Flexible counterweight shaft avoids vibration at undesirable frequencies.
∎ The counterweight supplied is suitable for cartridges weighing between 6 - 9g. An alternative counterweight for cartridges weighing between 4 - 6g is available as an accessory part.
∎ Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
∎ Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
∎ The straight armtube with an effective length of 9" reduces toe-in error.
∎ Silicone-damped armlift can be adjusted to suit working height of the arm.
∎ The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
 
Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.